Electrolux 318 205 122 Care and Cleaning of Stainless Steel, To Remove and Replace Oven Door

Models: 318 205 122

1 44
Download 44 pages 28.61 Kb
Page 38
Image 38

38Care & Cleaning

CARE AND CLEANING OF STAINLESS STEEL

Special care and cleaning are required for maintaining the appearance of stainless parts. Please refer to the table provided at the beginning of the General Care & Cleaning section in this Use & Care Manual.

TO REMOVE AND REPLACE OVEN DOOR

1.Open the door to the fully opened position.

2.Pull up the lock located on each hinge support toward front of range. You may have to apply a little upward pressure on the lock to pull it up.

3.Grasp the door by the sides, pull the bottom of the door up and toward you to disengage the hinge supports.

Keep pulling the bottom of the door toward you while rotating the top of the door toward the appliance to completely disengage the hinge levers.

4.Proceed in reverse to re-install the door. Make sure the hinge supports are fully engaged before unlocking the hinge levers.

 

Removal of the Oven Door

 

Lock in normal

Lock engaged

HINGE SLOT - Door removed

position

for door removal

from the appliance

SPECIAL DOOR CARE INSTRUCTIONS

Most oven doors contain glass that can break.

Read the following recommendations:

1.Do not close the oven door until all the oven racks are fully in place.

2.Do not hit the glass with pots, pans, or any other object.

3.Scratching, hitting, jarring or stressing the glass may weaken its structure causing an increased risk of breakage at a later time.

Page 38
Image 38
Electrolux 318 205 122 Care and Cleaning of Stainless Steel, To Remove and Replace Oven Door, Removal of the Oven Door