28
TO REMOVE THE WIREWORK RUNNERS
The wirework runners in both ovens can be removed
for cleaning.
1. Remove all shelves and furniture from the ov en.
2. Hold the wirework at the bottom, unclip fro m the
cavity side an gently pull towards the centre of
the oven.
3. Support the side panel at the bottom.
4. Unhook the runner and side panel at the top and
remove from the cavity.
5. To replace, ensure the side panel is ass embled
on to the wirework runner before hooking it back
into the oven.
Ensure that the wirework runners are firmly
in place before refitting the oven shelves.
CLEANING THE SHELVES, WIREWORKRUNNERS AND GRILL/OVEN FURNITURE
All removable parts, except the grill pan handle can
be washed in the dishwasher.
The grill pan, grill pan grid, deflector, meat tin, oven
shelves and wirework runners may be cleaned using
a soap impregnated steel wool pad. Soak ing first in
hot soapy water will make cleaning easier.
CARE OF STAYCLEAN SURFACES
The roofs and sides of both ovens and the main oven
back panel are coated with a Stayclean finish. They
should not be cleaned manually.
Aerosol cleaners must not be used on Stayclean
surfaces and must not come into contact with
elements or the door seal, as this may cause
damage.
During normal usethe Stayclean coating will become
splashed with fats and food residues. By running
the oven without food, the Stayclean surfaces burn
off any soilage. Regular use of the oven cleaning
cycle will help to keep the panels in good condition.
See page 29.
CAVITY
CENTRE
SIDE PANEL