Maintenance and Cleaning
Replacing the Light Bulb
1 Warning! Danger of electrical shock! Before replacing the light bulb
switch appliance off and disconnect from the electricity supply. Light bulb specifications:
Important!
When replacing the lamp only fit a lamp of suitable diameter, that is at least 18 mm, this will ensure a good seat on the rubber seal.
Where to purchase: specialist retailer or AEG Service Force Centre.
01. To switch off the appliance turn the temperature regulator to position "•".
2.Unplug the mains plug.
3. To change the light bulb, undo the cross head screw and remove the light bulb cover downwards.
4. Change the defective light bulb.
5. Refit the light bulb cover and the cross head screw.
818 17 | 23 |
