TG5050CE.fm.fm Page 10 Thursday, June 24, 2004 3:55 PM
Installation
Installing the Battery in the Handset
Insert the battery (1) and press it down until it snaps into the compartment (2). Close the cover.
2
1
To replace the battery:
Press the notch on the cover firmly and slide it as indicated by the arrow. Replace the old battery with a new one (p. 11). Close the cover and charge the handset for 6 hours.
Battery Charge
Place the handset on the base unit for 6 hours before initial use. Repeat charging will require approximately the same amount of charging time (6 hours) if the battery is depleted completely.
•The unit beeps once, the CHARGE indicator
lights and “Charging” is displayed.
•When the battery is fully charged, “Charge
completed” is displayed if there are no | CHARGE Indicator |
new calls in the Caller List. |
|
Battery strength
You can confirm the battery strength on the handset display.
Battery strength is indicated by the icons shown in the chart to the right.
Display prompt | Battery strength |
1 | Fully charged |
|
|
2 | Medium |
|
|
3 | Low |
|
|
3 (flashing) | Needs to be recharged. |
|
|
4 | Discharged |
|
|
10
