If the Following Appears on Your Display | Panasonic KX-TG5050C

TG5050CE.fm.fm Page 48 Thursday, June 24, 2004 3:55 PM

If the Following Appears on Your Display...

The following will be displayed when the unit needs your attention.

Display message	Cause & Remedy

Recharge battery	• The battery needs to be charged. Recharge the
Recharge battery	battery (p. 11).
Charge for 6 HRS	• The battery has been discharged. The handset will
Charge for 6 HRS	not work. Fully charge the battery (p. 10).
No link to base.	• The handset has lost communication with the base
Move closer to	unit. Walk closer to the base unit and try again or re-
base and try	register the handset (p. 42).
again.	• Confirm that the base unit’s AC adaptor is plugged in.
	• Raise the base unit antennas.

Please lift up	• A handset button was pressed while the handset was
Please lift up	on the base unit. Lift the handset and press the
and try again.	button again.
and try again.
	• When you tried to re-register the handset, the
Error!!	handset and base unit could not link for some reason,
	such as interference from electrical appliances. Move
	the handset and base unit away from any electrical
	appliances and try again.

Phone book full	• When you tried to store an item in the phone book,
	the phone book memory was full. Press [OFF] to exit
	programming mode. To erase other items from the
	phone book, see page 32.

Store VM access#	• A voice mail access number is not stored. Store the
Store VM access#	number (p. 33).
System is busy.	• The handset has lost communication with the base
Please try again	unit. Walk closer to the base unit and try again.
later.

48

Image 48

Panasonic KX-TG5050C operating instructions If the Following Appears on Your Display, Display message Cause & Remedy

Contents

Charge the battery for 6 hours before initial use GHz Digital Cordless PhoneModel No. KX-TG5050C Pulse-or-tone dialing capability Accessories included Battery charge For Best PerformanceBase unit location/Noise Contents Contents Location of Controls Base unitHandset FLASH/CALL Wait Button p How to use the soft keys/navigator key Handset soft keysHandset navigator key Display Missed calls Installation Connections Installation Installing the Battery in the Handset Battery ChargeBattery strength To replace the battery Installation Battery informationBattery replacement Recharge Programmable Settings Ringer settingHow to select a function item from the menu Programming Guidelines Handset Programmable Settings Function Menu Table Handset Programmable Settings Display Language Handset Dialing Mode HandsetEnglish Tone Programmable Settings Line Mode Handset OffAuto Talk Handset Programmable Settings Ringer Volume Handset Off ?Temporary ringer off Programmable Settings Ringer Tone Handset 1ToneScroll to Ringer tone by pressing d or Select the desired ringer tone by pressing Programmable Settings LCD Contrast Handset LowMessage Alert Handset Making Calls To have a hands-free phone conversationHands-free Digital Duplex Speakerphone 3334444 Low HighMaking Calls To turn this feature on, press the soft key Voice Enhancer TechnologyClarity Booster Backlit LCD display/Lighted handset keypad Answering Calls Auto Talk Call Display Service How caller information is displayedPersonalized Name Display Display Meaning Using the Caller List Viewing the Caller List Handset Using the Caller List Calling Back from the Caller List HandsetWhat √ means If a caller calls more than once Or B Press the soft key Repeatedly Until the number isDesired Format To erase a specific caller To erase all entriesPress the soft key C I D Or B to enter the Caller List Press the soft key YES Phone Book Tom5557654321 Storing Names and Numbers Handset Phone Book Selecting characters to enter namesIf you make a mistake while entering a name or number For example, to enter Tom Frank Phone Book Dialing from the Phone Book HandsetTo search for a name by initial Index table Alan Phone Book Chain Dial HandsetWhile you are on a call Jane 456-7890Erase? Erased Voice Mail Service Storing a Voice Mail Access Number HandsetEnter your access number, up to 32 digits Press the soft key Select at Voice Mail. Voice Mail Voice Mail Service Setting Voice Mail VM Tone Detection HandsetTo erase a stored voice mail access number OFF Voice Mail Service Listening to Voice Mail Messages Handset To listen to your voice mail messagesPress the soft key V M , then press C Voice Mail or s Special Features For Rotary or Pulse Service Users HandsetHandset Locator Base Unit Muting Your Conversation Handset Special Features For Call Waiting Service Users HandsetVisual Call Waiting Service Handset Special Features Call Waiting Deluxe Service Handset To turn the C.WTG Call Waiting options mode onScroll to C.WTG options by pressing d Select On by pressing d or B To use Call Waiting Deluxe Service Press FLASH/CALL WaitDisplay Function During a conference call, you can choose either After selecting Ans Answer or Hold After selecting Conf Conference or Conference Special Features Flash Button Handset 700msSelecting the flash time Handset Scroll to Set flash time by pressing d Special Features Key Tone Handset Key toneHandset Registered Re-registering the Handset Handset & Base Unit Connecting an optional headset To switch to the speakerphone while using the headsetBelt Clip Optional Headset Wall Mounting Connect the AC adaptor Wall Mounting To remove the wall mounting adaptor While pushing down the Release Levers a remove the adaptor B Direct Commands Menu item Command Selection itemsDuring programming If the Following Appears on Your Display Display message Cause & Remedy Troubleshooting Problem Cause & Remedy Troubleshooting System Answering System Useful Information Important Information Safety Instructions Specifications Safety Instructions Panasonic PRODUCT-LIMITED Warranty Panasonic Canada Inc Panasonic Canada Inc Ambler Drive, Mississauga, Ontario L4W 2T3PQQX14108ZA S0404-0