TG5050CE.fm.fm Page 20 Thursday, June 24, 2004 3:55 PM
Making Calls
To dial after confirming the entered number
1. Enter a phone number.
3334444
•If you misdial, press the soft key ( CLEAR ). Enter the correct phone number.
•If a pause is required when dialing, press the soft key ( PAUSE ) where needed (p. 37).
•To cancel, press [OFF].
2.Press [C] or [s].
3.To hang up, press [OFF] or place the handset on the base unit.
To adjust the receiver/ speaker volume during a conversation
There are 3 volume levels for the receiver and 6 volume levels for the speaker.
To increase volume, press [B]. To decrease volume, press [d].
e.g. Receiver volume: High Speaker volume: Level 6
Volume
Low 
High
dB
•The display shows the current volume setting.
•If you try to increase/decrease volume when it is at the maximum/minimum level, the handset will beep 3 times.
To redial using the redial list (Memory Redial)
The last 5 phone numbers dialed are stored in the redial list.
1.Press [REDIAL].
•The last number dialed is displayed.
2.Scroll to the desired number by pressing [d] or [B].
•You can also scroll down through the list by pressing [REDIAL].
•To exit the list, press [OFF].
3.Press [C] or [s].
•To erase an item, scroll to the item then press the soft key ( ERASE ).
•If “No items stored” is displayed, the list is empty.
To put a call on hold
Press [HOLD] during a conversation.
•“Hold” is displayed.
To return to the call, press [C] or [s].
•If another phone is connected on the same line (p. 9), you can also take the call by lifting its handset.
•If a call is kept on hold for 6 minutes, an alarm tone will start to sound and the Ringer/Message Alert indicator will start to flash rapidly. After 4 additional minutes on hold, the call will be disconnected.
To redial the last number dialed
Press [C] or [s], then press [REDIAL].
20
