Stainless steel surfaces
Perform daily cleaning with a slightly damp cloth. For more severe soiling, use a liquid cream. Always clean the steel in the direction of the steel finish. To ensure that the steel retains its shine, it is recommended that you use a polishing agent for stainless steel on a regular basis. Always polish in the direction of the steel finish (cross- wise).
Never use steel wool, metal sponges or other abrasive cleaning agents.
Cleaning of gas burner
Clean the control panel and knobs plus the pan grid, as well as burner caps and rings, with ordinary cleansing agents.
Never use scouring powder, Brillo pads, metal pads or other scouring agents on enamelled or painted surfaces!
Care must be taken to avoid boil-over
If water accidentally gets into the edge of the burner head
Mounting
This appliance must be installed by an authorised person.
This appliance shall be installed in accordance with the manufacturer's installation instructions, local gas fitting regulations, municipal building codes, AS5601 (AG601) Australian Standard - Gas Installations and any other relevant statutory regulations.
Data label
The data label is located on the underside of the hob next to the gas connection. A duplicate data label is supplied to adhere in an accessible area next to the hob. This appliance is suitable for Natural Gas and Universal LPG, ensure that the available gas supply matches the data label.
Ventilation
Ventilation must be in accordance with AS5601 (AG601) Gas installations. In general, the appliance should have adequate ventilation for complete combustion of gas, proper flueing and to maintain temperature of immediate surroundings within safe limits.
Location
Choose a location free of draughts and open doors and clear of combustible materials or other fire hazards. The location should ensure convenience of operation and service.
12 | 13 |
