General Care & Cleaning 19
CARE & CLEANING TABLE
Surfaces | How to Clean | |
|
| |
Aluminum & Vinyl | Use hot, soapy water and a cloth. Dry with a clean cloth. | |
| ||
|
| |
Painted and Plastic | Using a soft cloth, clean with mild dish detergent and water or a 50/50 solution | |
of vinegar and water. Follow by rinsing the area with clean water; dry and polish | ||
Control Knobs | ||
with a soft cloth. Glass cleaners may be used if sprayed on a soft cloth first. | ||
| ||
| DO NOT spray liquids directly on the control pad and display area. Do not use | |
| large amounts of water on the control panel - excess water on the control area | |
| may cause damage to the appliance. Do not use other liquid cleaners, abrasive | |
| cleaners, scouring pads, or some paper towels - they will damage the finish. To | |
| remove control knobs, turn to the OFF position; grasp firmly and pull straight off | |
| the shaft. To replace knobs after cleaning, line up the flat sides of both the knob | |
| and the shaft; then push the knob into place. | |
|
| |
Stainless Steel, Chrome | Clean stainless steel with hot, soapy water and a dishcloth. Rinse with clean water | |
and a cloth. Do not use cleaners with high concentrations of chlorides or | ||
Control Panel, Decorative | ||
Trim | chlorines. Do not use harsh scrubbing cleaners. Only use kitchen cleaners that are | |
| especially made for cleaning stainless steel. Always be sure to rinse the cleaners | |
| from the surface as bluish stains may occur during heating that cannot be removed. | |
|
| |
|
|
