Start the Wash Programme | Electrolux 3A instruction

Operating Instructions

Start the Wash Programme

0 1. Check that when the dishes and cutlery are loaded into the dishwasher the spray arms are free to rotate.

2.Open the tap fully.

3.Shut the door.

4.Press the ON/OFF button. The ON/OFF button indicator illuminates.

5.Press the programme button for the desired programme (see "Pro- gramme Table"). The programme indicator illuminates. The selected programme begins after around 6 seconds. The time remaining until the end of the programme is displayed on the multi-display, the time calculated is dependent on the load in the baskets.

With automatic programme adjustment this residual time count can be stopped or corrected if necessary (load quantity, degree of dirtiness, etc.) using the dishwasher control.

3	If fault messages are displayed on the multi-display after the start of
	the programme, please read the "What to do, if..." section.
	Changing/Interrupting/Cancelling
	the Wash Programme
3	Only change or interrupt a wash programme in progress if it is abso-
	lutely necessary to do so.
	Changing the wash programme
3	If you want to change the wash programme within 6 seconds of mak-
	ing a programme selection, briefly press the button for the new wash
	programme.
	If you want to change the wash programme at a later point in time, use
	the following procedure:

0 1. Press the button for the new wash programme and hold it pressed. The indicators for both programmes now flash.

2.After a few seconds only the indicator for the new programme flashes. Release the programme button, the new programme is now running.

Interrupting the wash programme by opening the door of the dishwasher

1Hot steam may escape from the appliance when opening the door. Open the door carefully.

26

Image 26

Electrolux 3A manual Start the Wash Programme, Changing/Interrupting/Cancelling, Changing the wash programme

Contents

Favorit 3A Please read these user instructions carefully Tips on using the applianceDear customer Pass them on to any subsequent owner of the appliance Contents Installation and Connection Instructions What to do, if Child Safety Safety InstructionsInstallation, Connection and Placing into Operation General Safety Correct Use Disposing of the Packaging Material DisposalEconomical and Ecological Dishwashing Disposal of Old Appliances Appliance Features and Control Panel Control Panel Multi-Display can display Special salt Prior to using for the first timeAdjusting the Water Softener Your area Electronic adjustment Remain illuminated Open the door, remove the lower Rack Filling with Salt for the Water SoftenerFill with dishwasher salt Turning it anticlockwise There are two ways to add rinse aid Switching Rinse Aid Supply On and OffRinse Aid Filling with Rinse Aid Fully open the rinse aid compartment lid Adjusting Rinse Aid Dosing Daily Use Loading Cutlery and Dishes Not be washed in the dishwasher Loading Cutlery Folded over to the left Loading Pans, Frying Pans Large PlatesLoad large and heavily soiled dishes in the lower basket To ease the loading of large items Two rear plate inserts in the lower Folded across one anotherAcross one another Baskets can be folded across one another Loading Cups, Glasses and Coffee Services Raising the Upper Basket Adjusting the Height of the Upper BasketLowering the Upper Basket Filling with Detergent Fill with detergent Use of 3 in 1/ Combi Detergent Tablets General AdviceSpecial Advice Concentrated Detergent Detergent tablets Selecting the Wash Programme Programme Table Soiling Wash Programme Changing/Interrupting/CancellingStart the Wash Programme Changing the wash programme Setting the delay start timer Setting or Changing the Delay Start TimerCancelling the wash programme Changing the delay start Emptying the Dishwasher Care and CleaningSwitching Off the Dishwasher Cleaning the Filter Stances Error messages What to do, if Dishes are still dirty There are problems with the operation of the dish- washerWash results are not satisfactory Dishes are wet and dull There are dried water drops on the glasses and dishes Technical DataLower rinse aid dosing Sample loading arrangements Upper basket Lower basket with cutlery basket Built-Under Dishwasher Installing the DishwasherSee enclosed installation instructions Free-Standing Appliances Plinth on free-standing appliances is not adjustable Work surface must be re-mounted Permitted water pressure Connecting the DishwasherWater Connection Connect the inlet hose Water inlet hose with safety valve Please take care when installing the water inlet hose Water drain Leak Prevention System Appliance is automatically pumped out Electrical Connection Changing a fuse Connections Guarantee Conditions Calls may be recorded for training purposes 08705 929Customer Care AEG Hausgeräte GmbH Postfach 90327 Nürnberg Copyright by AEG