Appliance Features and Control Panel | Electrolux 3A specs

Operating Instructions

Appliance Features and Control Panel
Top Spray Nozzle
Rubber Seal for
Connecting the
Water Feed to
the Spray Arm
Spray Arms
Water hardness switch
Container for
Salt
Container for
Detergent
Container for	Rating Plate Filters
Rinse Aid
8

Image 8

Electrolux 3A manual Appliance Features and Control Panel

Contents

Favorit 3A Tips on using the appliance Dear customerPlease read these user instructions carefully Pass them on to any subsequent owner of the appliance Contents Installation and Connection Instructions What to do, if Safety Instructions Installation, Connection and Placing into OperationChild Safety General Safety Correct Use Disposal Economical and Ecological DishwashingDisposing of the Packaging Material Disposal of Old Appliances Appliance Features and Control Panel Control Panel Multi-Display can display Prior to using for the first time Adjusting the Water SoftenerSpecial salt Your area Electronic adjustment Filling with Salt for the Water Softener Fill with dishwasher saltRemain illuminated Open the door, remove the lower Rack Turning it anticlockwise There are two ways to add rinse aid Switching Rinse Aid Supply On and OffRinse Aid Filling with Rinse Aid Fully open the rinse aid compartment lid Adjusting Rinse Aid Dosing Daily Use Loading Cutlery and Dishes Not be washed in the dishwasher Loading Cutlery Loading Pans, Frying Pans Large Plates Load large and heavily soiled dishes in the lower basketFolded over to the left To ease the loading of large items Folded across one another Across one anotherTwo rear plate inserts in the lower Baskets can be folded across one another Loading Cups, Glasses and Coffee Services Raising the Upper Basket Adjusting the Height of the Upper BasketLowering the Upper Basket Filling with Detergent Fill with detergent Use of 3 in 1/ Combi Detergent Tablets General AdviceSpecial Advice Concentrated Detergent Detergent tablets Selecting the Wash Programme Programme Table Soiling Changing/Interrupting/Cancelling Start the Wash ProgrammeWash Programme Changing the wash programme Setting or Changing the Delay Start Timer Cancelling the wash programmeSetting the delay start timer Changing the delay start Emptying the Dishwasher Care and CleaningSwitching Off the Dishwasher Cleaning the Filter Stances Error messages What to do, if There are problems with the operation of the dish- washer Wash results are not satisfactoryDishes are still dirty Dishes are wet and dull There are dried water drops on the glasses and dishes Technical DataLower rinse aid dosing Sample loading arrangements Upper basket Lower basket with cutlery basket Installing the Dishwasher See enclosed installation instructionsBuilt-Under Dishwasher Free-Standing Appliances Plinth on free-standing appliances is not adjustable Work surface must be re-mounted Connecting the Dishwasher Water ConnectionPermitted water pressure Connect the inlet hose Water inlet hose with safety valve Please take care when installing the water inlet hose Water drain Leak Prevention System Appliance is automatically pumped out Electrical Connection Changing a fuse Connections Guarantee Conditions Calls may be recorded for training purposes 08705 929Customer Care AEG Hausgeräte GmbH Postfach 90327 Nürnberg Copyright by AEG