Leak Prevention System

Installation and Connection Instructions

	Leak Prevention System
	For protection from damage due to water leaks, the dishwasher is
	equipped with a leak prevention system, the AQUA CONTROL SYSTEM.
	In the event of a fault, the safety valve immediately interrupts the sup-
	ply of water to the appliance and the drain pump switches on. By this
	means water can neither escape nor overflow. The remaining water in
	the appliance is automatically pumped out.
1	The AQUA CONTROL SYSTEM also works when the appliance is switched
	off – the appliance must however not be disconnected from the mains.

Page 39

Image 39

Electrolux 3A manual Leak Prevention System, Appliance is automatically pumped out

Contents

Favorit 3A Pass them on to any subsequent owner of the appliance Tips on using the applianceDear customer Please read these user instructions carefully Contents What to do, if Installation and Connection Instructions General Safety Safety InstructionsInstallation, Connection and Placing into Operation Child Safety Correct Use Disposal of Old Appliances DisposalEconomical and Ecological Dishwashing Disposing of the Packaging Material Appliance Features and Control Panel Multi-Display can display Control Panel Your area Prior to using for the first timeAdjusting the Water Softener Special salt Electronic adjustment Turning it anticlockwise Filling with Salt for the Water SoftenerFill with dishwasher salt Remain illuminated Open the door, remove the lower Rack Switching Rinse Aid Supply On and Off Rinse AidThere are two ways to add rinse aid Fully open the rinse aid compartment lid Filling with Rinse Aid Daily Use Adjusting Rinse Aid Dosing Not be washed in the dishwasher Loading Cutlery and Dishes Loading Cutlery To ease the loading of large items Loading Pans, Frying Pans Large PlatesLoad large and heavily soiled dishes in the lower basket Folded over to the left Baskets can be folded across one another Folded across one anotherAcross one another Two rear plate inserts in the lower Loading Cups, Glasses and Coffee Services Adjusting the Height of the Upper Basket Lowering the Upper BasketRaising the Upper Basket Fill with detergent Filling with Detergent General Advice Special AdviceUse of 3 in 1/ Combi Detergent Tablets Detergent tablets Concentrated Detergent Soiling Selecting the Wash Programme Programme Table Changing the wash programme Changing/Interrupting/CancellingStart the Wash Programme Wash Programme Changing the delay start Setting or Changing the Delay Start TimerCancelling the wash programme Setting the delay start timer Care and Cleaning Switching Off the DishwasherEmptying the Dishwasher Stances Cleaning the Filter What to do, if Error messages Dishes are wet and dull There are problems with the operation of the dish- washerWash results are not satisfactory Dishes are still dirty Technical Data Lower rinse aid dosingThere are dried water drops on the glasses and dishes Upper basket Lower basket with cutlery basket Sample loading arrangements Free-Standing Appliances Installing the DishwasherSee enclosed installation instructions Built-Under Dishwasher Work surface must be re-mounted Plinth on free-standing appliances is not adjustable Connect the inlet hose Connecting the DishwasherWater Connection Permitted water pressure Please take care when installing the water inlet hose Water inlet hose with safety valve Water drain Appliance is automatically pumped out Leak Prevention System Changing a fuse Electrical Connection Connections Guarantee Conditions 08705 929 Customer CareCalls may be recorded for training purposes AEG Hausgeräte GmbH Postfach 90327 Nürnberg Copyright by AEG

the appliance is automatically pumped out.