Electrolux 40660 i Start the wash programme, Interrupting or ending the wash programme, Washer

Operating Instructions

Start the wash programme

0 1. Check that when the dishes and cutlery are loaded in the dishwasher the spray arms are free to rotate.

2.Open the water tap fully.

3.Shut the door.

4.Press the ON/OFF button. ON/OFF button indicator comes on.

5.Press the button for the programme required (see “Programme Table“). The programme indicator lights up. One or two lights will flash in the multi-display. During this time it is possible to reselect the programme. The selected washing programme begins after approx. 6 seconds. The current wash programme stage will always be shown in the multi-dis- play.

3	If the top light and/or the middle light in the multi-display flash after
	the programme has started please read the section “What to do, if...“.
	Interrupting or ending the wash programme
3	Only interrupt a wash programme in progress if it is absolutely neces-
	sary. After the appliance door has been closed again the air that has
	entered will be quickly heated and expand. As a result water may pene-
	trate the base of the appliance and trigger the anti-flood system.
	Interrupting the wash programme by opening the door of the dish-
	washer
1	Hot steam can escape from the appliance when the door is opened.
	Open the door carefully.

0 1. Open the door of the dishwasher. The wash programme will stop.

2.Lights are flashing in the multi-display.

3.Shut the door. The wash programme will continue.

Ending the wash programme

0 1. Press the button for the wash programme that is running and hold it down until the programme indicator for the wash programme goes out.

2.Release the programme button; the wash programme has been ended.

24