Operating Instructions
Start the wash programme
0 1. Check that when the dishes and cutlery are loaded in the dishwasher the spray arms are free to rotate.
2.Open the water tap fully.
3.Shut the door.
4.Press the ON/OFF button. ON/OFF button indicator comes on.
5.Press the button for the programme required (see “Programme Table“). The programme indicator lights up. One or two lights will flash in the
3 | If the top light and/or the middle light in the |
| the programme has started please read the section “What to do, if...“. |
| Interrupting or ending the wash programme |
3 | Only interrupt a wash programme in progress if it is absolutely neces- |
| sary. After the appliance door has been closed again the air that has |
| entered will be quickly heated and expand. As a result water may pene- |
| trate the base of the appliance and trigger the |
| Interrupting the wash programme by opening the door of the dish- |
| washer |
1 | Hot steam can escape from the appliance when the door is opened. |
| Open the door carefully. |
0 1. Open the door of the dishwasher. The wash programme will stop.
2.Lights are flashing in the
3.Shut the door. The wash programme will continue.
Ending the wash programme
0 1. Press the button for the wash programme that is running and hold it down until the programme indicator for the wash programme goes out.
2.Release the programme button; the wash programme has been ended.
26
