Activating/deactivating RINSE+

If RINSE+ is activated, two additional rinse cycles take place with the programmes COTTONS/LINEN, EASY-CARES/EASY IRON and DELICATES. RINSE+ remains permanently saved – even after the appliance has been switched off.

Activating RINSE+:

1.Turn the programme selector to COTTONS/LINEN, EASY-CARES or DELI- CATES (with the temperature of your choice).

2.Simultaneously press and hold the PRE WASH and DELAY TIMER but- tons until RINSE and RINSE+ are illuminated on the programme progress display. RINSE+ has now been permanently activated.

Prior to the start of a programme RINSE+ is illuminated in the pro- gramme progress display and while the additional rinse cycles are being performed.

Deactivating RINSE+

1.Turn the programme selector to COTTONS/LINEN, EASY-CARES/EASY IRON or DELICATES (with the temperature of your choice).

2.Simultaneously press and hold the PRE WASH and DELAY TIMER but- tons until RINSE+ goes out on the programme progress display. RINSE+ is now permanently deactivated.

Setting the delay timer

The DELAY TIMER button allows you to delay the start of a programme.

1.Select the programme.

2.Press the DELAY TIMER button once if the wash programme is to start in 6 hours. The 6h indicator will illuminate.

Press the DELAY TIMER button twice if the wash programme is to start in 3 hours. The 3h indicator will illuminate.

3 If you press the DELAY TIMER button again, the delay timer will be can- celled. The indicator will go out.

3.To activate the delay timer, press the START/PAUSE button.

Note: If a time delay of 6 hours is selected, the 6h indicator will illumi- nate. After 3 hours the display will switch and 3h will be illuminated. After a total of 6 hours the wash programme will then start.

14