Problem

Possible cause

Remedy

 

The transit packaging has

Remove the transit packag-

 

not been removed.

ing.

The washing machine

The screw feet have not

Adjust the feet as described

in the installation and con-

vibrates when operating

been correctly adjusted.

nection instructions.

or is unstable.

 

 

 

 

There is very little washing

Operation is not affected by

 

in the drum (e.g. just one

 

this.

 

bathrobe).

 

 

 

The inlet hose screw con-

Tighten the inlet hose.

 

nection is leaking.

 

 

 

The outlet hose is leaking.

Replace outlet hose.

Water is running out

The drain pump lid has not

Close the cover properly.

from under the washing

been closed properly.

 

machine.

Washing was caught in the

Load washing carefully for

 

 

door.

the next wash.

 

The emergency drain hose is

Screw on the emergency

 

leaking.

drain hose firmly.

 

Too much detergent has

Follow the manufacturer's

There is a lot of foam.

instructions exactly when

probably been used.

 

measuring out detergent.

 

 

 

There is a kink in the outlet

Straighten the hose.

 

hose.

 

 

The END indicator is

The maximum pump height

Please contact your local

of 1m has been exceeded.

service centre.

flashing twice, and si-

 

 

multaneously an acous-

 

Switch off the appliance.

tic signal is sounding

 

 

Disconnect the power plug.

twice.

 

The drain pump is blocked.

Clean the drain pump. Re-

(Problems with the wa-

 

move foreign bodies from

ter outflow.)

 

 

the pump housing.

 

 

 

For sink spigot connections:

Clean the spigot.

 

the spigot is blocked.

 

 

Conditioner has not

The conditioner insert in the

Clean the detergent drawer,

been rinsed in, com-

partment w for condi-

compartment for additives

insert the conditioner insert

has not been correctly in-

tioner is filled with

firmly.

serted or is blocked.

water.

 

 

 

 

 

 

19