Electrolux 54850 S Hints for test centres

Hints for test centres

Hints for test centres

Testing in accordance with EN 60704must be carried out with

appliance fully loaded and using the test programme (see "Washing

programmes"chart).

Testing in accordance with EN 60242 must be carried out when the

salt dispenser and rinse aid container have been filled with salt and

rinse aid respectively and using the test programme (see "Washing

programmes"chart).

Load:

Rinse aid setting

Detergent dosage:

Position 4 (type III)

5 g + 20 g (type B)

9 standard place settings

Arrangement

lower basket

Arrangement cutlery basket

Arrangement upper

basket:without smaller

bowl and salad-bowl

Arrangement upper

basket:with smaller bowl

and salad-bowl

Cup racks: position A

Contents

Main Dear customer, CONTENTS Operating instructions Service Guarantee terms Installation instructions OPERATING INSTRUCTIONS Safety instructions Installation Child safety Your dishwasher in day-to-day use Disposal Economical and ecological dishwashing Description of the appliance Function buttons: Programme selection buttons: "Delay start" option button: Indicator lights: The control panel The digital display indicates: "3 in 1" function: Deactivation/activation of the 3 in 1 function Prior to using for the first time Setting the water softener a) Setting manually b)Setting electronically Filling with salt To fill: Rinse aid Filling with rinse aid Adjusting the dose Deactivation/activation of the rinse aid dispenser In daily use Loading cutlery and dishes The lower basket The cutlery basket The upper basket Adjusting the height of the upper basket To move to the higher position proceed as follows: The lower basket to the original position proceed as follows: Use of detergent Fill with detergent Different kinds of detergent Detergent tablets Concentrated detergent Combi detergents Use of "3 in 1" combi detergents General advice Special advice Washing programmes - - - - - - - Starting a washing programme 6. To interrupt or cancel a washing programme in progress 7. Cancelling the delay start in progress 8. End of the washing programme 9. Unloading the dishwasher Maintenance and cleaning Cleaning the filters D C A Page Prolonged periods of non-operation Frost precautions Moving the machine What to do, when... ...a flashing fault code appears ...there are problems when operating the dishwasher ...the wash results are not satisfactory The dishes are not clean The dishes are wet and dull There are streaks, milky spots or a bluish coating on glasses and dishes Water drops have dried onto glasses and dishes Service 08705 929 929 Customer Care Guarantee conditions Standard Guarantee Conditions Exclusions European Guarantee Technical specifications Installation instructions Fitting under a counter Levelling Water supply connections Water inlet hose with safety valve Please take care when installing the water inlet hose: Water outlet hose connection Attention! Electrical connection Hints for test centres