Putting in extra items or taking items out before end of programme

1.Open loading door

1Warning! Laundry and drum can become hot. Risk of burns!

2.Load or remove laundry items.

3.Close loading securely. Lock must audibly lock.

4.Press the START/PAUSE button to continue the drying cycle.

Drying cycle complete / removing laundry

Once the drying cycle is complete, the E END and CREASE GUARD displays light up.

3 The drying cycle is automatically followed by a crease guard phase which lasts around 30 minutes. The drum rotates in intervals during this phase. The laundry thereby remains relaxed and free of creases. The laundry can be removed at any time during the crease guard phase. (The laundry should be taken out towards the end of the crease guard phase at the latest to prevent creases from forming.)

1.Open loading door

2.Before removing the laundry, remove lint from the micro-fine filter. It is best to use a damp hand for this purpose (refer to “Cleaning and main- tenance” section).

3.Remove laundry.

4.Turn the programme selector to O OFF. Important! After each drying cycle

–clean the micro-fine filter and fine strainer,

–drain the condensate tank

(refer to the “Cleaning and maintenance” section).

5.Close loading door.

14