Electrical connection

Details on mains voltage, type of current and the fuses required should be taken from the type plate. The type plate is fitted near the loading aperture (see “Machine description” section).

Changing door stop

1 Warning! The door stop may only be changed by a qualified person. If necessary, please contact our after-sales service or your specialist deal- er.

Warning! Before changing the door stop, disconnect the mains plug; with a permanent connection: fully unscrew or deactivate the fuse.

1.Open loading door

2. Unscrew hinge A from the front of the machine and take off the loading door.

3. Use a thin screwdriver to pry off cover plates B and C.

4. Use an appropriate tool and exert pressure to unfasten locking block D from the snap-on fixture, take out and reinsert on the other side, having rotated the block through 180°.

5.Unscrew hinge A from the loading door, rotate through 180°, reinsert on the opposite side and screw down.

6.Reinsert cover plates B and C on the opposite site having first rotated them through 180°.

24