Cleaning heat exchanger
If the y HEAT EXCHANGER display is illuminated, the heat exchanger needs to be cleaned.
1 Caution! Operating when the heat exchanger is clogged with lint can damage the dryer. This also increases energy consumption.
1.Open loading door
2. Open base door. To do this, press the release button on the bottom of the loading opening and open the door to the left.
3.Remove lint from the inside of the
door and the heat exchange cham- ber.
4. Turn both lock washers inwards.
5.Pull heat exchanger out of base by
the handle.
1 Caution! Do not use sharp objects to clean. The heat exchanger could develop leaks.
6. Clean heat exchanger.
It is best to use a brush or to rinse thoroughly with a shower head.
7.Replace heat exchanger and lock
into place (turn both lock washers outwards until they snap into place).
8.Close base door.
3 The dryer will not operate if the base door is not closed.
1 Caution! Never operate the dryer without the heat exchanger.
18