Electrolux 58840R user manual What to do if, Troubleshooting by yourself

What to do if ... 31

What to do if ...

Troubleshooting by yourself

If, during operation, the error code E... plus number or letter) appears on the LCD: Switch the machine off and on again. Reset programme. Press the START PAUSE START PAUZE button If the error is still displayed, please inform your local Service Force Centre and quote the error code.

Problem	Possible cause	Remedy
	Mains plug is not plugged in or fuse	Plug in at mains socket. Check fuse
	is not working correctly.	in fuse box (domestic installation).
Dryer does not work.	Loading door is open.	Close loading door.
	Have you pressed the START PAUSE	Press the START PAUSE START
	START PAUZE button?	PAUZE button again.
		Select a different programme the
	Wrong programme selected.	next time you dry (see “Programme
		chart” chapter).
	Lint filters clogged.	Clean lint filters.
	Fluff filter clogged.	Clean fluff filter.
	Heat exchanger clogged with lint.	Clean heat exchanger.
	Overloading of laundry.	Observe recommended loading vol-
		umes.
Drying results	Ventilation slots in base area cov-	Uncover ventilation slots in base
unsatisfactory.
	ered up.	area.
		Clean inside surface of drum and
	Residue on inside surface of drum	drum ribs.
		Make an adjustment using the
	or drum ribs.
		DRYNESS DROOGTEGRAAD func-
		tion (see chapter ”Daily use”)
	Conductance of water at installa-	Re-programme standard setting
	tion site differs from standard set-	for degree of drying (see ‘Program-
	ting of machine.	ming options’ chapter).
Loading door does not	Fine strainer not in place and/or	Install fine strainer and/or snap
close.	mesh filter not locked in place.	large mesh filter into place.
When a button is	Washing protection. After the start	Turn the programme knob to OFF
pressed, Err appears on	of the programme, the option can
		UIT. Set the programme again.
the LCD.	no longer be set.