Electrolux 58840R Special accessories, Intermediate installation kit for stacked washer and dryer

40Installation

7.Unscrew cover plates E from the front of the machine, rotate through 180°, screw on the oppo- site side.

8.Unscrew door lock F, push down slightly and remove from the front of the machine.

9.Disconnect cable connector from door lock F.

10.Press snap-in button G in and down, press cover down slightly and remove from front of the ma- chine.

11.Disconnect cable connector from cover G.

E
	G
F
E
F	G

12.Change door lock F over to the opposite side, insert the cable connector and screw down the door interlock.

13.On the other side, insert the cable connector in cover G, insert cover and allow snap-in button to lock into place.

14.Insert loading door and hinges into recesses on the front of the machine and screw down.

Note regarding contact protection:The machine is only secure for operations again once all plastic parts have been inserted.

Special accessories

Intermediate installation kit for stacked washer and dryer:

Available from your Service Force Centre or your specialist dealer

These intermediate installation kits can be used to arrange the dryer and an automatic AEG-Electrolux washing machine (60cm wide, front loading) as a space- saving washer/dryer stack. The automatic washing machine is at the bottom and the dryer is at the top.

Version to be supplied:

– with extractable stacker plate 916.018 903

Read carefully the instructions supplied with the kit.