Electrolux 60820 guide

AEG Hausgeräte GmbH

Postfach 1036

D-90327 Nürnberg

http://www.aeg.hausgeraete.de

© Copyright by AEG

822 946 397 - 00 - 0602

Subject to change without notice

Image 44

Electrolux 60820 manual AEG Hausgeräte GmbH Postfach 90327 Nürnberg Copyright by AEG

Contents

Favorit Tips on using the appliance Dear customerPlease read these user instructions carefully Pass them on to any subsequent owner of the appliance Contents Installation and Connection Instructions What to do, if Safety Instructions Installation, Connection and Placing into OperationChild Safety General Safety Correct Use Disposal Economical and Ecological DishwashingDisposing of the Packaging Material Disposal of Old Appliances Appliance Features and Control Panel Control Panel Multi-Display can display Prior to using for the first time Your area Adjusting the Water SoftenerSpecial salt Electronic adjustment Filling with Salt for the Water Softener Fill with dishwasher saltUse dishwasher salt Open the door, remove the lower Rack Turning it anticlockwise There are two ways to add rinse aid Switching Rinse Aid Supply On and OffRinse Aid Filling with Rinse Aid Fully open the rinse aid compartment lid Adjusting Rinse Aid Dosing Daily Use Loading Cutlery and Dishes Not be washed in the dishwasher Loading Cutlery Tioned horizontally in the upper basketPlace knives, small spoons and small Forks in the cutlery tray Loading Pans, Frying Pans Large Plates Loading Cups, Glasses and Coffee Services Fold the plate insert to the left Raising the Upper Basket Adjusting the Height of the Upper BasketLowering the Upper Basket Filling with Detergent Fill with detergent Automatic Wash Programmes Concentrated DetergentDetergent tablets Selecting the Wash Programme Programme Table Soiling Changing/Interrupting/Cancelling Start the Wash ProgrammeWash Programme Changing the wash programme Setting or Changing the Delay Start Timer Cancelling the wash programmeDishwasher is switched on again Changing the delay start Switching Off the Dishwasher Load Sensing Sensor LogicEmptying the Dishwasher Immediately after the end of the programme Care and Cleaning Cleaning the Filter What to do, if Stances Error messages Symptom Possible Cause Solution There are problems with the operation of the dish- washer Wash results are not satisfactoryDishes are still dirty Wrong wash programme was selected Technical Data Dishes are wet and dullRinse aid was not used Rinse aid container is empty Lower rinse aid dosing Lower basket with cutlery basket Sample loading arrangementsUpper basket without cutlery tray Installing the Dishwasher See enclosed installation instructionsBuilt-Under Dishwasher Free-Standing Appliances Plinth on free-standing appliances is not adjustable Work surface must be re-mounted Connecting the Dishwasher Water ConnectionPermitted water pressure Connect the inlet hose Water inlet hose with safety valve Please take care when installing the water inlet hose Water drain Leak Prevention System Appliance is automatically pumped out Electrical Connection Changing a fuse Connections Guarantee Conditions Calls may be recorded for training purposes 08705 929Customer Care AEG Hausgeräte GmbH Postfach 90327 Nürnberg Copyright by AEG