Electrolux 62610 3

•The programme progress display shows the programme step that is

currently being carried out.

– (Prewash)

– (Main wash)

– (Rinse)

– (Extra Rinse)

– (Spin)

– (End)

•The multi-display shows the estimated time remaining (in hours and

minutes) until the end of the programme.

3The remaining programme time may increase or briefly remain constant

during the wash programme as the programme adjusts to various con-

ditions while washing (e. g. type of washing, amount of washing, rec-

ognising out-of-balance when spinning, special rinse cycle, etc.).

Interrupting a programme

•A washing programme can be interrupted at any tim e by pressi ng the

button (START/PAUSE) and then re-started by pressing the

button (START/PAUSE) again.

•To stop the washing machine before the programme has ended, turn

the programme knob to (OFF). Important: Be careful if there is

water in the appliance!

Adding washing

It is possible to add washing, as long as the (DOOR) light is lit green.

1.Press the button (START/PAUSE). The door can be opened.

2.Close the door and press the button (START/PAUSE) again. The

programme will continue.

When the programme has finished, (END) will illuminate on the pro-

gramme progress display. The door can be opened as soon as the in-

dicator (DOOR) is lit green.

1.Open the door and remove the washing.

2.Turn the programme knob to (OFF).

3.Close the water tap.