Electrolux 62610 manual What to do if, Remedying small malfunctions

What to do if...

Remedying small malfunctions

If during use of the appliance one of the following error codes is shown in the multi-display:

–E10 (Problems with water inflow),

–E20 (Problems with water outflow),

–E40 (door open),

please have a look at the following table.

When the fault is remedied, press the button (START/PAUSE). In the event of other errors (E and a number or letter): Switch the ap- pliance off and then on again. Re-set the programme. Press the

button (START/PAUSE).

If the error appears again, please contact the Customer Care Depart- ment, stating the error code.

Problem		Possible cause		Remedy
	Mains plug not plugged in		Connect the plug to a mains
	or fuse not working.		socket. Check fuse.
Washing machine is not	Door not closed properly.		Close door - there should be
			an audible click.
working.
	The	button (START/	Press the	button
	PAUSE) button was not
			(START/PAUSE).
	pressed for long enough.
The door cannot be	Child safety device engaged.		Release the child safety de-
closed.			vice.
When a button is	The selected function can-
pressed, Err appears in	not be combined with the		Select another function.
the multi-display.	programme set.
E40 appears.
indicator (END)	The door is not closed prop-		Close the door properly. Re-
flashes 4x, at the same
	erly.		start the programme.
time an acoustic signal
sounds 4x.
E10 appears.	Tap turned off.		Turn on the tap.
indicator (END)	The filter in the threaded in-		Turn off the tap. Unscrew the
flashes 1x, at the same
			hose, take out the filter and
time an acoustic signal	let hose fitting is blocked.		clean it.
sounds 1x.
(Problems with water	Water tap is furred with		Check the tap and have it re-
inflow)	lime scale or is faulty.		paired, if necessary.

18