27
3.Remove both plastic caps sideways.
3Special spanner A and sealing caps B
(2 off) and C (1 off) are supplied
with the appliance.
4.Remove screw D with its compres-
sion spring using special spanner A.
5.Turn sealing cap C upside down as
shown in the illustration.
6.Seal hole using sealing cap C.
7.Unscrew and remove two sc rews E
using special spanner A.
8.Unscrew and remove four s crews F
using special spanner A.
9.Remove transit bar G.
10.S crew in the four s crews F again.
11. Seal the two big holes using sealing
caps B.
Important! Press all sealing caps B
(2 off) and C (1 off) in firmly, so that
they snap into place. (Splash protec-
tion).
Where to install
Important! The appliance must not be used in a room where there is a
danger of frost. Frost damage or impaired operation! Frost damage is
not covered by the warranty.
•The surface on which the appliance is to be installed must be firm
and level. Do not install the appliance on carpets or on soft floor cov-
erings.