6.Press CD to store the entry. The channel number on the display stops blinking.
BANK 2
18125.2500
AIR
HOLD
7.If that frequency is already stored in another channel, you will hear a "beep", and the duplicate channel number will appear on the display.
If you want to store the frequency in the selected channel (18) as well, press CD again. Or, press CV and enter another frequency for the currently selected channel. The channel number on the display stops blinking.
Note: Any frequency already stored in any channel will automatically be replaced by the new one.
8.If you try to enter a frequency that is outside one of the 10 Bands, you will hear a "beep", and the word "Error" appears on the display.
BANK 2
18Error
HOLD
Press 0 and
9.To program another channel, repeat the above procedures.
Deleting a Stored Frequency
To delete a frequency from a channel:
1.Display the channel and frequency to be deleted.
2.Press CD on the numeric keypad.
3.Press CD. The current channel is erased, and the display shows 000.000.
Note: That channel will be skipped during scanning.
15
