Trou bleshooti n9
If your UBC 220XL T is not performing properly, try the steps listed below.
PROBLEM
Scanner won'twork.
Improper reception.
Scan won'tstop.
Scan won'tstart.
Search won'tstart.
Keypad won'twork.
SOLUTION
Check the power connections.
Check the volume and squelch.
Make sure the power switch is turned on.
Check the antenna connection.
-
You may be in a fringe area. Reposrtionthescanne
Adjust the Squelch Control.
Check the antenna connection.
It is possible that none of the
programmed frequencies are active at the time.
Make sure there are some programmed channels.
Adjust the Squelch Control.
Adjust the Squelch Control.
Check the Keypad Lock.
I
If you still cannot get satisfactory results and want additional
information, or to return the unit for seNice, please call or write the Uniden Technical Service Division. The address and
phone number are listed in the Warranty (at the end of this manual).
25
