To access a specific channel:
1.Press @.
2.Enter the channel number using the numeric keys.
3.Press @ again.
Priority Scan
The UBC 220XL T has 10 Priority Channels, 1 per Bank. Initially, these are the first channel in each Bank. (e.g. Channel 1, Channel 21, Channel 41, and so on.) The scanner checks the Priority Channel(s) every 2 seconds during the Scan cycle. If a transmission is received, the scanner will stop at that channel. If the Priority Channel in any Bank is "locked Out"',it will be skipped during scanning.
!
You can move the Priority to any other channel in a Bank as follows:
1.Go directly to that channel using any of the methods described above.
2.Press and hold @ for at least 2 seconds. You will hear a "beep", and P will appear on the display to the left of the new channel number. That channel will now
be the Priority Channel for that Bank. (The P will no longer appear for the previous Priority Channel.)
To activate Priority Scan, press @. The PRI indicator will
appear at the bottom of the display. To deactivate Priority Scan, press @ again. The PRI indicator will disappear from the bottom of the display.
Delay
Normally the scanner will resume scanning when a transmission stops. If you want to remain on a channel until a responding transmission is received, activate the DELAY
feature. This feature can be active in SCAN, SEARCH, and WEATHER Modes.
1.Press (DELAY)The. CLY indicator appears at the bottom of the display. The scanner will now pause 2 seconds after transmission stops before resuming scanning.
2.Press (DELAY)again to deactivate Delay. The CLY indicator disappears from the bottom of the display.
17
