INSTALLATION INSTRUCTIONS

INSTALLATION

Ifoor is not level, adjust
levellinglegst o suit POWE R S UPPL Y
230/240V -10Am
p
s
Thehos e should not be
extended by morethan
2 metres or waterpump-
outproblems may occur
Fixdrain hose max of
10mm below thet opof
thedishwashe r
Remove entire plastic
membranefrom si nk trap
spigot& fitdrain hose tospigot
withclamp
There should be a minimum
2mmgap between the top of
thedishwasher and
undersideof benc h top
Gap on both sides should be
equal, & no greater than
5mm per side.
600mm max.
300mm min.
Secure dishwasher with
brackets and screws provided
Inlet water supply
• Cold water pressure: 800 kPa max - 50 kPa
min
• Water flow rate 10 L/minute min.
• If cold water pressure is in excess of 800 kPa,
a pressure-reducing valve should be used.
Check for leaks.
WARNING!
Make sure that mains plug is disconnected from the mains socket during installation.
CAUTION!
Obey the instructions in the enclosed template to:
• build-in the appliance,
• install the furniture door,
• connect to the water supply and drain.
Install the appliance under a counter (kitchen worktop or sink).
If a repair is necessary, the appliance must be easily accessible for the engineer.
Put the appliance adjacent to a water tap and drain.
For the venting of the appliance only water hoses and mains cable openings are necessary.
The appliance has adjustable feet to allow the adjustment of its height.
30 Installation