Before Using for the First Time
Initial Cleaning
Wipe the ceramic glass cooking surface with a damp cloth to remove any traces left from manufacturing.
Important: Do not use any caustic or abrasive cleaners! The surface could be damaged.
Operation of the cooking surface
Touch control sensor panels
To operate the touch control sensor panels, touch the desired panel with the tip of your pointed finger until the relevant displays illuminate or go out, or until the desired function is carried out.
Ensure that you are only touching one sensor panel when operating the appliance. If you finger is too flat on the panel, the sensor panel below may be actuated as well.
Switching on the appliance
The entire appliance is switched on using the | . | ||
Touch the ox. two seconds. |
| ||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The digital displays will show 
.
After the
appliance, a cooking setting must be selected for a cooking zone within approx. 10 seconds, or a time must be set using the timer (egg timer func− tion). If not, the appliance will switch itself off again for reasons related to safety.
11
