2.While the control lamp is flashing rapidly, use the 
or 
timersetting sensor panels to set the desired period of time for this cooking zone up un− til the point where it automatically switches itself off (e.g. 15 minutes).
The safety cut−out function will be activated after several minutes.
The control lamp will now flash more slowly and the remaining cooking time will be shown in the display as it elapses. If the safety cut−out func− tion has been set for more than one cooking zone, the time displayed will be that for the cooking zone with the shortest period of cooking time re− maining. The control lamps for the other cooking zones for which the sa− fety cut−out function has been set will illuminate. To display the remaining cooking time for any of these cooking zones, it must be selected using the timer sensor panel, and the corresponding control lamp will then flash ra− pidly.
To reset the remaining cooking time the desired cooking zone must be se− lected using the timer sensor panel. The corresponding control lamp will then flash more rapidly. The settings are reset using the 
or 
timer setting sensor panels.
After the set period of cooking time has elapsed the cooking zone automa− tically switches itself off, an acoustic signal sounds for two minutes and the timer display flashes 
.
3.To switch off the signal, touch the timer sensor panel.
To make the setting more quickly, touch any of the | or | timer setting | ||
sensor panels until the desired value is reached. |
|
| ||
If the | timer setting sensor panel is actuated first, the time setting will | |||
begin at 99 minutes, and if the | timer setting sensor panel is actuated | |||
first, the time setting will begin at 1 minute. |
|
| ||
23
