13
Loading
LOADING THE SILVERWARE BASKET
Load the silverware basket while it is in the bottom rack or take
the basket out for loading on a counter or table.
Place small items like baby bottle caps, jar lids, corn cob holders
etc., in a covered section. Close the cover to hold small items in
place.
Use suggested loading patterns, as shown, to increase
washability of your silverware.
Be sure nothing protrudes through the bottom of basket or rack
to block the spray arm.
Do not mix silver and stainless to avoid damaging the silver finish.
The silverware basket can be separated and placed in several locations in
the bottom rack. Load silverware in all sections or just one, depending on
your load.
When covers are up, mix items in each section of the basket with some
pointing up and some down to avoid nesting. Water spray cannot reach
nested items.
To remove small basket:
1. Hold the center basket and one small basket. Slide the small basket back
to release the tabs from the corresponding slots.
2. Pull the baskets apart.

CAUTION

Cut Injury. Load sharp items (knives skewers, etc.) pointing down.
Failure to do so may result in injury.