8Operation
BEFORE YOU START
• Prerinse is not required. Simply scrape off any bones or large food
particles.
• If connected to a food waste disposer, make certain the disposer is
empty before starting the dishwasher.
• Scrape off tomato-based food soils (see page 21).
• Remove certain foods such as mustard, mayonnaise, lemon juice,
vinegar, salt or dressings from stainless steel flatware as soon as
possible. These foods may cause rusting and pitting if allowed to remain in
contact with the surface for an extended period of time.
OPERATING THE DISHWASHER
1. After loading the dishwasher and adding detergent, select the desired
cycle and options by pressing the pads. The indicator lights for the selected
cycle and options will illuminate. To cancel an option press the pad again.
2. To start a cycle, press the START/Cancel pad once then close the door
until it latches. After a pause, the fill will begin.
The dishwasher remembers your last cycle so you do not have to reset the cycle
each time. To start the dishwasher using the same cycle and options selected on
the previous wash, just press the START/Cancel pad.
3. To cancel a running cycle, press the START/Cancel pad once. The
dishwasher will drain, then shut off. To turn the dishwasher off without
draining, press the START/Cancel pad twice. To prevent unplanned cycle or
option changes, these selections are “locked in” after 1 minute.
IMPORTANT
• If START/Cancel is not pressed within 30 seconds of choosing your cycle, the dishwasher
will turn off.
IMPORTANT
• If a cycle pad is pressed after the controls have been “locked in,” the light above the
current cycle will flash three times.