20 Cycles, Options & Lights
CHILD LOCK OPTION
The control touchpads can be locked to prevent unwanted use. If this feature is
activated between cycles, the dishwasher cannot be operated until the controls are
unlocked. If desired, the controls can be locked after a cycle or delay has started.
Setting the Child Lock:
1. Press the Air Dry pad for three seconds.
2. An indicator light next to the lock graphic will illuminate when the controls are
locked.
To Cancel:
1. Press the Air Dry pad for three seconds.
2. The indicator light will go off.
Indicator Description
Clean Light Illuminates at the end of the cycle and remains lit until the door has been open
for 30 seconds continuously.
Sanitized Light Illuminates at the end of the cycle when conditions have been met to achieve
sanitization. The light will remain lit until the door has been open for 30
seconds continuously.
IMPORTANT
• If a cycle or option pad is pressed after the controls have been locked, the indicator
light next to the lock graphic will flash five times.
• This option does not lock the door, only the dishwasher controls.
IMPORTANT
• When Sanitize is selected, cycles are monitored to assure sanitization. The Sanitized
light will not activate if sanitization requirements are not met. This could happen if
the cycle is interrupted, power failure occurs or incoming water temperature is below
120° F (49° F).
• The Clean and Sanitized indicator lights will not relight after a power failure until after
the next cycle is run.