Instructions for the Installer
| BURNER | RAPID | AUXILIARY | ||||||
TYPE OF GAS |
|
| (large) | (medium) | (small) | ||||
|
|
|
|
|
|
|
| ||
| POSITION | MAX | MIN | MAX | MIN | MAX | MIN | ||
| NOMINAL THERMAL |
|
|
|
|
|
|
| |
NATURAL GAS | POWER | kW | 2.9 | 0.65 | 1.9 | 0.45 | 1.0 | 0.33 | |
NOMINAL FLOW |
|
|
|
|
|
|
| ||
20 mbar |
|
|
|
|
|
|
| ||
VALUE = | RATE | m3/h | 0.276 | 0.062 | 0.181 | 0.043 | 0.095 | 0.031 | |
37.78 MJ/m3 | NOZZLE REFERENCE | 119 | Adjust. | 96 | Adjust. | 70 | Adjust. | ||
Ws - 50.7 MJ/ m3 | |||||||||
| 1/100 mm |
|
|
|
|
|
|
| |
LPG GAS | NOMINAL THERMAL |
|
|
|
|
|
|
| |
POWER | kW | 2.7 | 0.65 | 1.9 | 0.45 | 1.0 | 0.33 | ||
NOMINAL FLOW |
|
|
|
|
|
|
| ||
VALUE = |
|
|
|
|
|
|
| ||
RATE | g/h | 195 | 46.8 | 137 | 32.4 | 72 | 23.8 | ||
49.92 MJ/Kg | |||||||||
|
|
|
|
|
|
|
| ||
| NOZZLE REFERENCE | 86 | 40 | 71 | 32 | 50 | 28 | ||
| 1/100 mm |
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
| |
Important safety requirements
This hob must be installed in accordance with the Gas Safety (Installation and Use) Regulations (Current Edition) and the IEE Wiring Regulations (Current Edition).
Detailed recommendations are contained in the following British Standards Codes Of Practice: B.S. 6172/ B.S. 5440, Par. 2 and B.S. 6891 Current Editions.
The hob should not be installed in a bed sitting room with a volume of less than 20 m3. If it is installed in a room of volume less than 5 m3 an air vent of effective area of 110 cm2 is required. If it is installed in a room of volume between 5 m3 and 10 m3 an air vent of effective area of 50 cm2 is required, while if the volume exceeds 11 m3 no air is required.
However, if the room has a door which opens directly to the outside no air vent is required even if the volume is between 5 m3 and 11 m3.
If there are other fuel burning appliances in the same room, B.S. 5440 Part 2 Current Edition, should be consulted to determine the requisite air vent requirements.
12
