IMPORTANT
SAFETY INSTRUCTIONS
(For Gardening Appliances)
WARNING: WHEN USING ELECTRIC TOOLS, BASIC SAFETY PRECAUTIONS SHOULD ALWAYS BE FOLLOWED TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, AND PERSONAL INJURY, INCLUDING THE FOLLOWING:
READ ALL INSTRUCTIONS.
1 . Avoid Dangerous Environment - Don't use appliances in damp or wet locations.
2 . Don't Use In Rain.
3.Keep Children Away - All visitors should be kept at a distance from work area.
4.Dress Properly - Do not wear loose clothing or jewelry. They can be caught in moving parts. Use of rubber gloves and substantial footwear is recom- mended when working outdoors. Wear protective hair covering to contain long hair.
5.Use Safety Glasses - Always use face or dust mask if operation is dusty.
6 . Use Right Appliance - Do not use appliance for any job except that for which it is intended.
7. Avoid Unintentional Starting - Don't carry
8.Don't grasp the exposed cutting blades or cutting edges when picking up or holding the appliance.
9.Don't Force Appliance - It will do the job better and with less likelihood of a risk of injury at the rate for which it was designed.
IO . Don't Overreach - Keep proper footing and balance at all times.
1 1 . Stay Alert
12.Store Idle Appliances Indoors - When not in use. appliances should be stored indoors in dry, and high or
13.Maintain Appliance With Care - Keep cutting edge sharp and clean for best performance and to reduce the risk of injury. Follow instructions for lubricat- ing and changing accessories. Inspect adapter cord periodically, and if damaged, have it repaired by an authorized service facility. Inspect exten- sion cords periodically and replace if damaged. Keep handles dry, clean, and free from oil and grease.
14.Check Damaged Parts - Before further use of the appliance, a guard or other part that is damaged should be carefully checked to determine that it will
MODEL UM140D
'LiM ,& DESCRIPTION
__
11 Name Plate
21 Screw M5x33
36 Tapping Screw 8T M4x16
41 Handle Set W t h Item 81
51 Inlet
61 Compression Spring 3
11 Lock.Off Button
81 Handle Set W t h Item 41
91 Makita Label
1 0 | 1 | Square Nu1 M 5 |
11 | 1 | Side Handle |
1 2 | 1 | Switch Lever |
1 3 | 1 | Switch |
1 4 | 1 | P P R i n g 1 7 |
1 5 | 1 | Cord |
1 6 | 1 | Pipe Complete |
1 7 | 1 | Pan Head Screw M5x25 lWith Washer) |
182 Hex Nul M5
1 9 | 1 | Screw M5x2O |
EM' DESCRIPTION
2 0 | 1 | Motor Housisng Set IWith Item 231 |
211 Motor 1D.C. 1 2 V I
221 0 Ring 4 2
2 3 | 1 | Motor Housmng Set IWith Item 201 |
2 4 | 4 | Tapping Screw BT M4x16 |
2 5 | 1 | Pan Head Screw M4x14 (With Washer1 |
2 6 | 1 | Safety cover |
271 Hex. Nut M4
281 Blade Holder Complete
2 9 | 1 | Retainer |
301 Bearing BOX
311 Flat Washer 8
321 Ball Bearing 608DOW
331 Flat Head Screw M5r10
341 Cap
3 5 | 2 | Tapping Screw BT 3x10 |
3 6 | 1 | FlatWaveWasher8 8 |
37 | 1 |
|
2
15