ADDITIONAL SAFETY RULES FOR CHARGER
1 . The Makita charger Model DC122 is specifically designed to charge only the Makita battery 121 or 122. Do not attempt to charge any other battery with this charger.
2.Handle the charger carefully. Do not drop or strike it.
3.Never carry the charger by cord or yank it to disconnect from receptacle.
4.Keep cord from heat, oil, chemicals, and sharp edges.
5.Use only a power source of the same voltage a s indicated on the nameplate of the charger when charging.
6. Do not attempt to use a
7 . Charge the battery at a room temperature of 10°C ( 5 O O F ) - 4OoC ( 1 0 4 O F ) .
8.Do not charge in place exposed to direct sunlight.
9.Do not allow the charger to get wet.
IO. Do not charge inside a box or container of any kind.
1 1 . Do not charge near volatile, flammable material such a s gasoline, paint, gas, adhesive, etc.
12.Do not charge on top of paper, carpet, vinyl sheeting, cloth materials, etc.
13.Do not allow anything to cover or clog the charger vents. Do not attempt to insert anything into the vents.
14.Do not charge in dusty place.
15.Stop charging immediately if you notice anything abnormal. Ship or take the charger and the battery to your nearest Makita Service Center or Distributor for checking them.
16.Do not attempt to disassemble or make modifications to the charger.
17 . Do not put any metal objects or foreign matter into the inlet of the charger.
SAVE THESE INSTRUCTIONS.
Operation
Hold/support the tool firmly with the grip and loop handle. Switch ON only when the blades are not contacting the ground. Cut an even swath while swinging the tool from right to left, angling the cutting head slightly while doing so. When cutting grass or weeds next to walls, curbs, sidewalks and the like, move the tool slowly and smoothI y aIong them.
Swith t h e tool from right to left
6 | 11 |
