Makita UM140D Switch action, Connecting the battery to the tool, Charging, Carrying the battery

Models: UM140D UM140DST

1 8
Download 8 pages 2.17 Kb
Page 7
Image 7
Switch action

Switch action

Lock-off button

I

To prevent the trigger from being acciden-

 

 

tally pulled, a lock-offbutton is provided.

 

 

To start the tool, push in the lock-off

 

 

button and pull the trigger. Release the

 

 

trigger to stop.

 

 

 

Switch trigger I

 

CAUTION:

0 Before connecting the battery to the tool, always check to see that the switch trigger actuates properly and returns to the “OFF” position when released,

0 Do not switch on the tool when someone is nearby or when the blades are contacting the ground.

Connecting the battery to the tool

Connect the battery to the tool using the adaptor cord. To prevent the adaptor cord from being accidentally disconnected, hook the cord to both strain relief hooks on the tool and the battery.

Adaptor cord

Charging

Connect the battery to the charger using the adaptor cord. Thc power source. The charging light will illuminate and charging ing light goes out at a certain time, the charging is complete. UI

(Note: Refer to the table below for the charging time.)

 

Charger

 

Battery

DC122

 

 

 

Approx. 1

hour

121

AoDrox. 2

hours

Charger

Batterv-,,Outlet

CAUTION:

Connecting the battery to the tool Always charge the Makita battery 122 immediately after purc

.Always recharge the Makita battery 122 after use.

plug the charger into the ill begin. When the charg- llug the charger.

DC121

ox. 4 hours

Connector

light

Adaptor cord

ise.

//I Straight relief hook

I

Strain relief hook

 

Carrying the battery

Hook the battery to your waist belt. If the adaptor cord is too long for your work, use the band provided to hold it when you coil it shorter.

If the Makita battery 122 has not been used for long periods, time specified in the table above. (Example: If it has not been i it for approx. one week). Charging continues even after the ch, battery is left uncharged for more than six months, it may be light does not come on within five minutes after you start the be unchargeable. Ship or take the charger and the battery to y Center or Distributor for checking.

large it for more than the ?d for six months, charge ging light goes out. If the ,me unchargeable. If the harging, the battery may u r nearest Makita Service

10

7

Page 7
Image 7
Makita UM140DST manual Switch action, Connecting the battery to the tool, Charging, Carrying the battery