Operating Instructions
1)The water hardness will only be indicated acoustically if the acoustic signal has been activated.
2)(°d) German degree, measure of the hardness of water
3)[mmol/l] millimol per litre, international unit for the hardness of water
4)On this setting the length of the programme may be slightly longer.
*) Factory setting
Setting the water softener
Using the table as a guide, adjust the water softener to that which cor- responds to the hardness of the water in your area:
0The dishwasher must be switched off.
Setting manually:
1.Open the dishwasher door.
2. Remove the lower basket from the dishwasher.
3. Turn the hardness range switch to 0 or 1 (see table).
4.Replace the lower basket.
Setting electronically:
5.Press the ON/OFF button.
The LED indicators for all the buttons in the control panel that are now able to be selected will become illuminated.
3 | If the only LED indicator illuminated is one that belongs to a pro- |
| gramme button, this means that this programme has been activated. |
The programme must be cancelled:
Press function buttons 2 and 3 simultaneously for approx. 1 second. The LED indicators for all the buttons in the control panel that are now able to be selected will become illuminated.
6.Press function buttons 2 and 3 simultaneously and keep them pressed. The LED indicators in function buttons 1 to 3 will flash.
7.Press function button 1.
The LED indicator for function button 1 will flash. The
The number of the acoustic signals heard (only when the acoustic sig- nal has been activated) also corresponds to the hardness setting.
8.Pressing function button 1 increases the hardness setting by 1. (Exception: hardness setting 1 follows hardness setting 10).
9.When the hardness setting is correct, press the ON/OFF switch. The hardness setting is now saved.
11
