Electrolux 85050 VI manual Water inlet hose with safety valve

Models: 85050 VI

1 48
Download 48 pages 62.49 Kb
Page 41
Image 41
Water inlet hose with safety valve

 

Installation and Connection Instructions

3

The following section is only applicable to dishwashers that have a

 

safety valve on the threaded hose fitting for the tap:

Water inlet hose with safety valve

After connecting the double-walled water inlet hose, the safety valve is next to the tap. Therefore the water inlet hose is only under pressure while the water is running. If the water inlet hose starts to leak during this operation, the safety valve cuts off the running water and the draining pump in the dishwasher is switched on.

1 Please take care when installing the water inlet hose:

The electrical cable for the safety valve is in the double-walled water inlet hose. Do not immerse the water inlet hose or the safety valve in water.

If the water inlet hose or the safety valve is damaged, remove the mains plug immediately.

A water inlet hose with safety valve must only be replaced by your local Service Force Centre.

41

Page 41
Image 41
Electrolux 85050 VI manual Water inlet hose with safety valve, Please take care when installing the water inlet hose