Leg Installation
1 | 2 |
| 1 |
| 1 |
| 3 |
| 2 |
Legs are packed in styrofoam top pack. | Note: It is strongly recommended |
Note: Legs should be installed near to where | that a pallet or lift jack be used rather than tilting. |
appliance is to be used, as they are | Raise unit about a foot. Unscrew temporary legs from |
not secure for long transit. | couplings on all four corners. |
Leveling/Adjustments/Alignment
1 | 2 | ||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Measure the four corners in cutout area to verify if | For uneven or sloped floors, level unit with metal shims |
flooring is level. | only, as the adjustment required may exceed |
| the thread available in the leg. |
3 | 4 | 3 |
Screw legs into couplings on all | Lower range gently to keep any undue strain from | Move unit into opening. |
four corners. | legs and internal mounting hardware. |
|
4
3 | /8” | ) | |||
| 5 | cm |
| ||
(0. | 9 |
|
| ||
|
|
| |||
|
|
|
|
| |
Check that unit is level side to
side and front to back. Side trim of the high corner
must be 3/8” (0.95 cm) above countertop.
5 | 6 |
1 
2
1 |
If leveling is required, move unit out of opening. | Lift unit and prop on wood blocks. |
14 | 15 |
