Operating Instructions
Adding special salt
If you are using dishwasher detergent and special salt separately, add the special salt:
–Before using the dishwasher for the first time.
–When the indicator for special salt J is illuminated on the control panel.
0 1. Open the door, remove the lower basket.
2. Undo the lid on the salt container by turning it anticlockwise.
3.When using for the first time: fill the salt container with water.
4.Place the funnel supplied on the con-
tainer opening.
Fill the container with salt through 
the funnel; the capacity of the con-
tainer is approx. 
ing on the grain size. Do not overfill
the salt container with salt.
3 | The water expelled by filling the salt container with salt runs out of the |
| salt container onto the base of the washing compartment. This is not a |
cause for concern, the water will be pumped out at the start of the next wash programme.
5.Clean any salt remnants on the container opening.
6.Turn the lid clockwise to the stop, otherwise dishwasher salt will leak into the wash water, this could lead to poor wash results. To avoid this run a rinse programme after filling the salt container with special salt. This will wash away salt water and any salt crystals that have been spilt.
3 | Depending on the size of the salt grains, it can take several hours for |
| the salt to dissolve in the water and the special salt indicator J to |
extinguish. The setting of the water softener and the consumption of salt are dependent on the hardness of the local water.
13
