Electrolux 89020 I user manual Anti-flood device is activated, Wash results are not satisfactory

Models: 89020 I

1 32
Download 32 pages 22.49 Kb
Page 26
Image 26

26What to do if…

Display message and malfunction

intermitted audible signal

appears in the display

Anti-flood device is activated

The programme does not start.

Possible cause and solution

Close the water tap and contact your local Service Force Centre.

The dishwasher’s door has not been properly closed. Close the door.

The main plug is not plugged in. Insert the main plug.

The fuse has blown out in the household fuse box.

Replace the fuse.

Delay start has been set.

If dishes are to be washed immediately, cancel the delay start.

Once these checks have been carried out, switch on the appliance: the programme will continue from the point at which it was interrupted.

If the malfunction or fault code reappears contact the Service Force Centre.

For other fault codes not described in the above chart, please contact your local Service Force Centre, quoting the model (Mod.), product number (PNC) and serial number (S.N.). This information can be found on the rating plate located on the side of the dishwasher door.

So that you always have these numbers at hand, we recommend you to make a note of them here:

Mod. : . . . . . . . . . . . . . . . . . . . . . . .

PNC :. . . . . . . . . . . . . . . . . . . . . . . .

S.N. : . . . . . . . . . . . . . . . . . . . . . . . .

The wash results are not satisfactory

The dishes are not clean

The dishes are wet and dull

The wrong washing programme has been se- lected.

The dishes are arranged in such a way as to stop water reaching all parts of the surface. The baskets must not be overloaded.

The spray arms do not rotate freely due to incorrect arrangement of the load.

The filters in the base of the washing com- partment are dirty or incorrectly positioned.

Too little or no detergent has been used.

Where there are limescales deposits on the dishes; the salt container is empty or the in- correct level of the water softener has been set.

The drain hose connection is not correct.

The salt container cap is not properly closed.

Rinse aid was not used.

The rinse aid dispenser is empty.

Page 26
Image 26
Electrolux 89020 I user manual Anti-flood device is activated, Wash results are not satisfactory