22Select and start a washing programme
Select and start a washing programme
1.Check that the baskets have been loaded correctly and that the spray arms are free to rotate.
2.Check that the water tap is opened.
3.Press the ON/OFF button.
4.Select the washing programme. ( See "Washing programmes chart" ).
5.If required, postpone the start time of the washing programme.
6.Set, if required, the options.
7.Press the OK / START button and close the door, the washing programme will start automatically.
If the delay start has been set, the countdown will start automatically. Once the delay start has elapsed the programme will start automatically.
The opening of the door will interrupt the countdown. Close the door; the countdown will continue from the point at which it was interrupted.
WARNING!
Interrupt or cancel a washing programme in progress ONLY if it's absolutely nec- essary.
Attention! Hot steam may escape when the door is opened. Open the door carefully.
Cancel a delay start or a washing programme in progress
1.Press RESET button.
2.The message CONFIRM CANCEL ? is displayed.
3.Press OK / START button to confirm.
4.The appliance returns to setting mode and the message CHOOSE PROGRAMME is
displayed.
•If a delay start is cancelled, also set the washing programme has been cancelled.
•If a new washing programme is set, check that there is detergent in the detergent dis- penser.
Interrupt a washing programme in progress
•Open the dishwasher door; the programme will stop. The message PLEASE CLOSE DOOR is displayed.
•Close the dishwasher door; the programme will continue from the point at which it was interrupted.
End of the washing programme
•The dishwasher will automatically stop and an acoustic signal informs you of the end of the washing programme.
•The messages PROGRAMME END alternated with PLEASE SWITCH OFF are displayed.
1.Press the ON/OFF button.
2.Open the dishwasher door.
Leave the door ajar and wait a few minutes before removing the dishes; in this way they will be cooler and the drying will be improved
