43
5. Take hold of the door glass panels on their
upper edge one after the other and take
them out of the guide by pulling them up-
wards..
Cleaning the door glass panels
Clean the door glass panels thoroughly with a solution of water and washing up
liquid. Then dry them carefully
Putting the door glass panels back.
1. From above insert the door glass panels at
an angle into the door profile at the bot-
tom edge of the door one after the other
and lower them.
3Insert the smaller panel first, then the larg-
er panel.
2. Take hold of the door trim (B) at each side,
position it on the inside edge of the door
and plug the door trim (B) into the upper
edge of the door