Inserting combination shelf, baking tray and roasting tray

3 Anti-tip device

All insertable components have a small curved indentation on their left and right edges. This indentation serves as an anti-tip device and must always point towards the back of the oven.

Inserting combination shelf:

Insert combination shelf so that the two guide bars point downwards. Insert the combination shelf onto the oven shelf runners so that the two holes engage onto the retaining pins on the telescopic runners.

Inserting baking tray, roasting tray:

Insert trays so that the anti-tip device is pointing towards the back of the oven. Insert the trays onto the telescopic runners so that the two holes engage onto the front retaining pins on the telescopic runners.

Inserting combination shelf and roasting tray:

When using combination shelf and roasting tray together, insert the shelf’s anti-tip device exactly into the indentations in the tray.

3 To make it easier to insert the insertable component when runners are extended to different extents, lay the insertable component onto

the runners, push it in as far as the stop and then lower it onto the retaining pins at the front.

22