Replacing the centre glass panels

1.Insert the centre panels at an angle from above into the section of the

door in which the handle is located, one after the other (á).

2.Lower the centre panels down and push them towards the lower edge

of the door as far under the retain- ing frame as they will go (à).

Replacing the upper glass panel

1.From above, insert the upper-most panel at an angle into the section of

the door in which the handle is lo- cated (á).

2.Lower the panel. Place the glass against the pressure spring at the handle, and in front of the retaining

frame at the lower edge of the door. Push it into the frame (à).

The glass plates must be firmly at- tached.

Re-hang the door

53