Electrolux B 4100 manual Changing the Signal Tone, Setting the Countdown

Operating Instructions

Countdown

The countdown operates independently and can therefore be set when the oven is switched on as well as switched off.

Setting the Countdown

01. Press the “CLOCK” C button.

2. Set the time required within

5 seconds using the + and - buttons.

When the time set on the count- down has expired, an acoustic signal sounds for approx. two minutes.

3.Press the “CLOCK” C button to switch off the signal.

Changing the Setting on the Countdown

01. Using the “CLOCK” C button, re-select the time set on the countdown.

2.Set the new time required within 5 seconds using the + or - buttons.

Switching Off the Countdown Early

01. Using the “CLOCK” C button, re-select the time set on the countdown.

2.Within 5 seconds set the time required to "0" using the - button.

Checking the Countdown Setting

A few seconds after the countdown has been set, the time display indi- cates the current time again. You can check the amount of time left on the countdown at any time.

01. Using the “CLOCK” C button, re-select the time set on the countdown. The time remaining on the countdown is displayed.

Changing the Signal Tone

The frequency of the signal tone can be set to 3 different tones.

01. Press the - button until the changed signal tone sounds and release. The frequency is set to the next level.

2.Press the - button again until the changed signal tone sounds and release.

The frequency is set to the next level.

22