Instructions for the user
21
9. Special maintenance
Periodically, it is necessary to maintain or replace s ome parts that are subject to wear and tear.
Specific instructions are given below for each t ype of maintenance.
Before carrying out maintenance, switch off the power supply to the appliance and close the
gas tap.

9.1 Removing the oven door

In order to clean the oven door more thoroughly, we recomm end removing it as follows:
• open the door completely;
• hook the rings A onto the appropriate se ats in the hinges (Fig. A);
• lift the door slightly and remove it (Fig. B);
• place the door on a horizontal surface;
• unscrew the sc rew
B using a screwdriver and remove the tab C (Fig. C);
• clean the glass D (Fig. C) and door components as described in section “8.7.1 Cleaning the
oven door”;
• afterwards, follow the removal instr uctions in reverse order.

9.2 Replacing the oven light bulb

Proceed as follows:
• open the oven door;
• unscrew the glass safety cap anticlockwise (Fig. D); unscrew the bulb and replace it with
another one for high temperatures (300°C) with the following characteristics:
Voltage: 230 V / 50 Hz
Power: 15 W
Attachment: E 14
• Refit the glass cap and switch on the power. It is possible to check that the oven light is
working even when the door is closed by turning the functi on switch knob to position .