(S3PT-7)
(SBM-5)
“Wait a minute...Save a life!”
(S3PT-2)

SAFETY

Be particularly careful when transporting the Implement with the Tractor. Turn curves or go up hills only at a low speed and using a gradual steering angle. Rear

WARNING! mounted implements move the center of gravity to the rear and remove weight from the front wheels. Make certain, by adding front ballast, that at least 20% of the

tractor’s weight is on the front wheels to prevent rearing up, loss of steering control or Tractor tip-over. Slow down on rough or uneven surfaces to prevent loss of steering control which could result in property damage or possible injury. Do not transport unless 3-Point lift lever is fully raised and in the latched transport position. Dropping implement in transport can cause serious damage to the tractor and/or Implement and possibly cause the operator or others to be injured or killed.

WARNING!

DANGER!

The rotating parts of this machine continue to rotate even after the Tractor has been turned off. The operator should remain in his seat for 60 seconds after the brake has been set, the PTO disengaged, the tractor turned off, and all evidence of rotation has ceased.

There are obvious and hidden potential hazards in the operation of this Implement as in all power-driven or pulled equipment. REMEMBER! This machine is often operated in rough terrain conditions that include tall grass, weeds, gullies, holes, slopes, hidden obstructions and the like. Serious injury or even death may occur unless care is taken to assure the safety of the operator and bystanders in the area. Do not operate this machine with anyone in the immediate area.

WARNING!

Relieve hydraulic pressure prior to doing any maintenance or repair work

 

on the Implement. Place the Implement on the ground or securely

 

blocked up, disengage the PTO, and turn off the tractor engine. Push

 

and pull the Remote Cylinder lever in and out several times prior to

 

starting any maintenance or repair work. (S3PT-9)

DANGER!

This Implement is wider than the Tractor. Be careful when operating

or transporting this equipment to prevent the Implement from running

 

 

into or striking sign posts, guard rails, concrete abutments or other

 

solid objects. Such an impact could cause the Implement and Tractor

 

to pivot violently resulting in loss of steering control, serious injury, or

 

even death. Never allow the Implement to contact obstacles. (S3PT-12)

DANGER!

The flail cutter shaft is designed for standard rotation (same

 

rotation as the tractor wheels during forward travel). Never operate the

 

cutter shaft in the reverse rotation. Operating this mower in reverse

 

rotation may cause objects to be thrown out the front of the mower

 

head.

 

Safety Section 1-10

Page 13 Page 15
Page 14
Image 14
Tiger Products Co., Ltd JD 72-7520 manual Starting any maintenance or repair work. S3PT-9
Page 13 Page 15

JD 72-7520 specifications

Tiger Products Co., Ltd is renowned for its innovative machinery solutions, and one of its standout offerings is the JD 72-7520 model. This advanced machine is designed to meet the diverse needs of the woodworking and manufacturing industries, providing a range of features that enhance operational efficiency and precision.

The JD 72-7520 is characterized by its robust construction, ensuring durability and longevity even in demanding work environments. Built with high-quality materials, this machine can withstand the rigors of continuous use, making it a reliable choice for businesses looking to invest in long-term equipment.

One of the main features of the JD 72-7520 is its powerful motor. This engine drives the machine's operations with superior strength, allowing it to perform heavy-duty tasks effortlessly. The motor's efficiency not only contributes to faster processing times but also results in lower energy consumption, making it an eco-friendly choice for manufacturers.

Technologically, the JD 72-7520 incorporates advanced digital controls that enhance user experience and operational precision. These controls facilitate easy adjustments and settings, enabling operators to fine-tune parameters for different types of materials and desired outcomes. With this level of control, manufacturers can achieve consistent results and maintain high-quality production standards.

Another noteworthy characteristic of the JD 72-7520 is its versatility. Designed to handle various woodworking tasks, the machine can be used for cutting, shaping, and finishing a wide range of materials. This adaptability makes it suitable for different applications, from furniture making to cabinetry and beyond, allowing businesses to expand their service offerings without investing in multiple equipment types.

Moreover, the JD 72-7520 places a strong emphasis on safety features. Enhanced user protection mechanisms are integrated, minimizing the risk of accidents during operation. These include safety guards, emergency stops, and sensors that prevent mishaps, making it a safe working environment for operators.

In summary, the Tiger Products Co., Ltd JD 72-7520 is an extraordinary machine that combines power, efficiency, and safety. Its durable construction, advanced digital controls, versatility, and emphasis on user safety make it a valuable asset for any woodworking or manufacturing business looking to enhance productivity and quality. Whether used in small workshops or large manufacturing facilities, the JD 72-7520 stands out as a top choice in its category.
Top Page Image Contents